🥕 👴🏾 🐰 toxコミュニティに参加するか、5分でノードをインストールします 🌾 🚳 🐈

貪欲な読者、本の虫、戦闘機をインターネット上の正義のために迎えます！私たちの武器の補充では、それはトックスと呼ばれます。ここで、％username％、そのアセンブリと逆アセンブリを示します。

debian_tox_dht

TOXと呼ばれるこのようなすばらしいシステムがあります。こちらが彼らの公式ウェブサイトであり、ここが githubのプロフィールです。

すでに何度もtoxについて書いていますが、主な利点をリストします。DHT-中央サーバーへの依存はなく、少なくとも1つのノードで十分です。クライアントの暗号化-VasyaはMashaに書き込みます。電報パシャは何も読みません。

3つのインストールオプションがあります。

手動での組み立てと構成、および手順の説明（以下の記事で説明）
ksenobayt によって提案されたスクリプトを使用した自動アセンブリおよび構成（新しいバージョン）
Darka によって検出されたパッケージからのインストール（「デフォルト」構成。構成を編集する方法の例は、この記事にあります）

まず、githubからtoxcoreをダウンロードします： https : //github.com/irungentoo/toxcore/archive/master.zip 、解凍します。

インストールは公式ドキュメントに記載されています：

ブートストラップノードの実行方法（wiki）
コンパイル（github、INSTALL.md）
手順（github、bootstrap_daemonのREADME.md）

上記のページに基づいて、このチュートリアルが作成され、ノードが起動されました。

これは設定され、正常に機能します：

root@l64tox1:~# uname -a Linux l64tox1 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u1 (2015-12-14) x86_64 GNU/Linux

フォルダーに入ります。

 root@l64tox1:/usr/tox# cd toxcore-master

そこに見えるもの：

 root@l64tox1:/usr/tox/toxcore-master# l total 164 -rwxr-xr-x 1 root root 68 Dec 16 23:22 autogen.sh drwxr-xr-x 2 root root 4096 Dec 16 23:22 auto_tests drwxr-xr-x 2 root root 4096 Dec 16 23:22 build -rw-r--r-- 1 root root 20610 Dec 16 23:22 configure.ac -rw-r--r-- 1 root root 35147 Dec 16 23:22 COPYING drwxr-xr-x 2 root root 4096 Dec 16 23:22 dist-build drwxr-xr-x 3 root root 4096 Dec 16 23:22 docs -rw-r--r-- 1 root root 241 Dec 16 23:22 DONATORS -rw-r--r-- 1 root root 662 Dec 16 23:22 .gitignore -rw-r--r-- 1 root root 19317 Dec 16 23:22 INSTALL.md -rw-r--r-- 1 root root 235 Dec 16 23:22 libtoxav.pc.in -rw-r--r-- 1 root root 341 Dec 16 23:22 libtoxcore.pc.in drwxr-xr-x 2 root root 4096 Dec 16 23:22 m4 -rw-r--r-- 1 root root 877 Dec 16 23:22 Makefile.am drwxr-xr-x 6 root root 4096 Dec 16 23:22 other -rw-r--r-- 1 root root 2524 Dec 16 23:22 README.md drwxr-xr-x 2 root root 4096 Dec 16 23:22 super_donators drwxr-xr-x 2 root root 4096 Dec 16 23:22 testing drwxr-xr-x 2 root root 4096 Dec 16 23:22 toxav drwxr-xr-x 2 root root 4096 Dec 16 23:22 toxcore drwxr-xr-x 2 root root 4096 Dec 16 23:22 toxdns drwxr-xr-x 3 root root 4096 Dec 16 23:22 toxencryptsave -rw-r--r-- 1 root root 1505 Dec 16 23:22 tox.spec.in -rw-r--r-- 1 root root 1698 Dec 16 23:22 .travis.yml

ライブラリをインストールします。

 apt-get install build-essential libtool autotools-dev automake checkinstall check git yasm libsodium13 libsodium-dev

そして

 apt-get install libconfig-dev

autogen.shを開始します。

 root@l64tox1:/usr/tox/toxcore-master# ./autogen.sh Running autoreconf -if... libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `configure_aux'. libtoolize: copying file `configure_aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. libtoolize: copying file `m4/libtool.m4' libtoolize: copying file `m4/ltoptions.m4' libtoolize: copying file `m4/ltsugar.m4' libtoolize: copying file `m4/ltversion.m4' libtoolize: copying file `m4/lt~obsolete.m4' configure.ac:291: installing 'configure_aux/ar-lib' configure.ac:212: installing 'configure_aux/compile' configure.ac:292: installing 'configure_aux/config.guess' configure.ac:292: installing 'configure_aux/config.sub' configure.ac:9: installing 'configure_aux/install-sh' configure.ac:9: installing 'configure_aux/missing' build/Makefile.am: installing 'configure_aux/depcomp' parallel-tests: installing 'configure_aux/test-driver'

コンフィギュレーターを起動し、デーモンを復活させます（ --enable-daemon

）：

./configure --enable-daemon

 root@l64tox1:/usr/tox/toxcore-master# ./configure --enable-daemon checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether UID '0' is supported by ustar format... yes checking whether GID '0' is supported by ustar format... yes checking how to create a ustar tar archive... gnutar checking whether make supports nested variables... (cached) yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking linux/version.h usability... yes checking linux/version.h presence... yes checking for linux/version.h... yes checking for Linux epoll(7) interface... yes checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking for ar... ar checking the archiver (ar) interface... ar checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for crypto_pwhash_scryptsalsa208sha256 in -lsodium... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking sodium.h usability... yes checking sodium.h presence... yes checking for sodium.h... yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for int16_t... yes checking for int32_t... yes checking for pid_t... yes checking for size_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for uint8_t... yes checking whether byte ordering is bigendian... no checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for gettimeofday... yes checking for memset... yes checking for socket... yes checking for strchr... yes checking for malloc... yes checking for clock_gettime in -lrt... yes checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... no checking whether pthreads work with -Kthread... no checking whether pthreads work with -kthread... no checking for the pthreads library -llthread... no checking whether pthreads work with -pthread... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking for pthread_self in -lpthread... yes checking for OPUS... no configure: WARNING: disabling AV support No package 'opus' found checking for CHECK... yes checking for LIBCONFIG... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating build/Makefile config.status: creating libtoxcore.pc config.status: creating tox.spec config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands

テストをコンパイルして実行します。テストには最大5分かかります。

チェックする

 root@l64tox1:/usr/tox/toxcore-master# make check make check-recursive make[1]: Entering directory '/usr/tox/toxcore-master' Making check in build make[2]: Entering directory '/usr/tox/toxcore-master/build' CC ../toxcore/libtoxcore_la-DHT.lo CC ../toxcore/libtoxcore_la-network.lo CC ../toxcore/libtoxcore_la-crypto_core.lo CC ../toxcore/libtoxcore_la-ping_array.lo CC ../toxcore/libtoxcore_la-net_crypto.lo CC ../toxcore/libtoxcore_la-friend_requests.lo CC ../toxcore/libtoxcore_la-LAN_discovery.lo CC ../toxcore/libtoxcore_la-friend_connection.lo CC ../toxcore/libtoxcore_la-Messenger.lo CC ../toxcore/libtoxcore_la-ping.lo CC ../toxcore/libtoxcore_la-tox.lo CC ../toxcore/libtoxcore_la-util.lo CC ../toxcore/libtoxcore_la-group.lo CC ../toxcore/libtoxcore_la-assoc.lo CC ../toxcore/libtoxcore_la-onion.lo CC ../toxcore/libtoxcore_la-logger.lo CC ../toxcore/libtoxcore_la-onion_announce.lo CC ../toxcore/libtoxcore_la-onion_client.lo CC ../toxcore/libtoxcore_la-TCP_client.lo CC ../toxcore/libtoxcore_la-TCP_server.lo CC ../toxcore/libtoxcore_la-TCP_connection.lo CC ../toxcore/libtoxcore_la-list.lo CCLD libtoxcore.la CC ../toxdns/libtoxdns_la-toxdns.lo CCLD libtoxdns.la CC ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/libtoxencryptsave_la-pbkdf2-sha256.lo CC ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/libtoxencryptsave_la-pwhash_scryptsalsa208sha256.lo CC ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/libtoxencryptsave_la-utils.lo CC ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/libtoxencryptsave_la-crypto_scrypt-common.lo CC ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/libtoxencryptsave_la-runtime.lo CC ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/libtoxencryptsave_la-scrypt_platform.lo CC ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/nosse/libtoxencryptsave_la-pwhash_scryptsalsa208sha256_nosse.lo CC ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/sse/libtoxencryptsave_la-pwhash_scryptsalsa208sha256_sse.lo CC ../toxencryptsave/libtoxencryptsave_la-toxencryptsave.lo CCLD libtoxencryptsave.la CC ../other/DHT_bootstrap-DHT_bootstrap.o CCLD DHT_bootstrap CC ../other/bootstrap_daemon/tox_bootstrapd-tox-bootstrapd.o CCLD tox-bootstrapd CC ../testing/DHT_test-DHT_test.o CCLD DHT_test CC ../testing/Messenger_test-Messenger_test.o CCLD Messenger_test CC ../testing/dns3_test-dns3_test.o CCLD dns3_test CC ../testing/tox_sync-tox_sync.o CCLD tox_sync CC ../testing/tox_shell-tox_shell.o CCLD tox_shell CC ../testing/irc_syncbot-irc_syncbot.o CCLD irc_syncbot make encryptsave_test messenger_autotest crypto_test network_test assoc_test onion_test TCP_test tox_test dht_autotest make[3]: Entering directory '/usr/tox/toxcore-master/build' CC ../auto_tests/encryptsave_test-encryptsave_test.o CCLD encryptsave_test CC ../auto_tests/messenger_autotest-messenger_test.o CCLD messenger_autotest CC ../auto_tests/crypto_test-crypto_test.o CCLD crypto_test CC ../auto_tests/network_test-network_test.o CCLD network_test CC ../auto_tests/assoc_test-assoc_test.o CCLD assoc_test CC ../auto_tests/onion_test-onion_test.o CCLD onion_test CC ../auto_tests/TCP_test-TCP_test.o CCLD TCP_test CC ../auto_tests/tox_test-tox_test.o CCLD tox_test CC ../auto_tests/dht_autotest-dht_test.o CCLD dht_autotest make[3]: Leaving directory '/usr/tox/toxcore-master/build' make check-TESTS make[3]: Entering directory '/usr/tox/toxcore-master/build' make[4]: Entering directory '/usr/tox/toxcore-master/build' PASS: encryptsave_test PASS: messenger_autotest PASS: crypto_test PASS: network_test PASS: assoc_test PASS: onion_test PASS: TCP_test PASS: tox_test PASS: dht_autotest make[5]: Entering directory '/usr/tox/toxcore-master/build' make[5]: Nothing to be done for 'all'. make[5]: Leaving directory '/usr/tox/toxcore-master/build' ============================================================================ Testsuite summary for tox 0.0.0 ============================================================================ # TOTAL: 9 # PASS: 9 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[4]: Leaving directory '/usr/tox/toxcore-master/build' make[3]: Leaving directory '/usr/tox/toxcore-master/build' make[2]: Leaving directory '/usr/tox/toxcore-master/build' make[2]: Entering directory '/usr/tox/toxcore-master' make[2]: Nothing to be done for 'check-am'. make[2]: Leaving directory '/usr/tox/toxcore-master' make[1]: Leaving directory '/usr/tox/toxcore-master'

インストール： make install

またはcheckinstall

。 checkinstallの方が良いのはそのためです： http : //habrahabr.ru/post/130868/

インストールする

 root@l64tox1:/usr/tox/toxcore-master# make install make install-recursive make[1]: Entering directory '/usr/tox/toxcore-master' Making install in build make[2]: Entering directory '/usr/tox/toxcore-master/build' make[3]: Entering directory '/usr/tox/toxcore-master/build' /bin/mkdir -p '/usr/local/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libtoxcore.la libtoxdns.la libtoxencryptsave.la '/usr/local/lib' libtool: install: /usr/bin/install -c .libs/libtoxcore.so.0.0.0 /usr/local/lib/libtoxcore.so.0.0.0 libtool: install: (cd /usr/local/lib &amp;amp;&amp;amp; { ln -s -f libtoxcore.so.0.0.0 libtoxcore.so.0 || { rm -f libtoxcore.so.0 &amp;amp;&amp;amp; ln -s libtoxcore.so.0.0.0 libtoxcore.so.0; }; }) libtool: install: (cd /usr/local/lib &amp;amp;&amp;amp; { ln -s -f libtoxcore.so.0.0.0 libtoxcore.so || { rm -f libtoxcore.so &amp;amp;&amp;amp; ln -s libtoxcore.so.0.0.0 libtoxcore.so; }; }) libtool: install: /usr/bin/install -c .libs/libtoxcore.lai /usr/local/lib/libtoxcore.la libtool: install: warning: relinking `libtoxdns.la' libtool: install: (cd /usr/tox/toxcore-master/build; /bin/bash /usr/tox/toxcore-master/libtool --silent --tag CC --mode=relink gcc -I.. -I../toxcore -pthread -g -O2 -version-info 0:0:0 -lm -lrt -o libtoxdns.la -rpath /usr/local/lib ../toxdns/libtoxdns_la-toxdns.lo libtoxcore.la -lsodium ) libtool: install: /usr/bin/install -c .libs/libtoxdns.so.0.0.0T /usr/local/lib/libtoxdns.so.0.0.0 libtool: install: (cd /usr/local/lib &amp;amp;&amp;amp; { ln -s -f libtoxdns.so.0.0.0 libtoxdns.so.0 || { rm -f libtoxdns.so.0 &amp;amp;&amp;amp; ln -s libtoxdns.so.0.0.0 libtoxdns.so.0; }; }) libtool: install: (cd /usr/local/lib &amp;amp;&amp;amp; { ln -s -f libtoxdns.so.0.0.0 libtoxdns.so || { rm -f libtoxdns.so &amp;amp;&amp;amp; ln -s libtoxdns.so.0.0.0 libtoxdns.so; }; }) libtool: install: /usr/bin/install -c .libs/libtoxdns.lai /usr/local/lib/libtoxdns.la libtool: install: warning: relinking `libtoxencryptsave.la' libtool: install: (cd /usr/tox/toxcore-master/build; /bin/bash /usr/tox/toxcore-master/libtool --silent --tag CC --mode=relink gcc -I.. -I../toxcore -pthread -g -O2 -version-info 0:0:0 -lm -lrt -o libtoxencryptsave.la -rpath /usr/local/lib ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/libtoxencryptsave_la-pbkdf2-sha256.lo ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/libtoxencryptsave_la-pwhash_scryptsalsa208sha256.lo ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/libtoxencryptsave_la-utils.lo ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/libtoxencryptsave_la-crypto_scrypt-common.lo ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/libtoxencryptsave_la-runtime.lo ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/libtoxencryptsave_la-scrypt_platform.lo ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/nosse/libtoxencryptsave_la-pwhash_scryptsalsa208sha256_nosse.lo ../toxencryptsave/crypto_pwhash_scryptsalsa208sha256/sse/libtoxencryptsave_la-pwhash_scryptsalsa208sha256_sse.lo ../toxencryptsave/libtoxencryptsave_la-toxencryptsave.lo libtoxcore.la -lsodium ) libtool: install: /usr/bin/install -c .libs/libtoxencryptsave.so.0.0.0T /usr/local/lib/libtoxencryptsave.so.0.0.0 libtool: install: (cd /usr/local/lib &amp;amp;&amp;amp; { ln -s -f libtoxencryptsave.so.0.0.0 libtoxencryptsave.so.0 || { rm -f libtoxencryptsave.so.0 &amp;amp;&amp;amp; ln -s libtoxencryptsave.so.0.0.0 libtoxencryptsave.so.0; }; }) libtool: install: (cd /usr/local/lib &amp;amp;&amp;amp; { ln -s -f libtoxencryptsave.so.0.0.0 libtoxencryptsave.so || { rm -f libtoxencryptsave.so &amp;amp;&amp;amp; ln -s libtoxencryptsave.so.0.0.0 libtoxencryptsave.so; }; }) libtool: install: /usr/bin/install -c .libs/libtoxencryptsave.lai /usr/local/lib/libtoxencryptsave.la libtool: install: /usr/bin/install -c .libs/libtoxcore.a /usr/local/lib/libtoxcore.a libtool: install: chmod 644 /usr/local/lib/libtoxcore.a libtool: install: ranlib /usr/local/lib/libtoxcore.a libtool: install: /usr/bin/install -c .libs/libtoxdns.a /usr/local/lib/libtoxdns.a libtool: install: chmod 644 /usr/local/lib/libtoxdns.a libtool: install: ranlib /usr/local/lib/libtoxdns.a libtool: install: /usr/bin/install -c .libs/libtoxencryptsave.a /usr/local/lib/libtoxencryptsave.a libtool: install: chmod 644 /usr/local/lib/libtoxencryptsave.a libtool: install: ranlib /usr/local/lib/libtoxencryptsave.a libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /usr/local/lib ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- /bin/mkdir -p '/usr/local/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c DHT_bootstrap tox-bootstrapd '/usr/local/bin' libtool: install: /usr/bin/install -c .libs/DHT_bootstrap /usr/local/bin/DHT_bootstrap libtool: install: /usr/bin/install -c .libs/tox-bootstrapd /usr/local/bin/tox-bootstrapd /bin/mkdir -p '/usr/local/include/tox' /usr/bin/install -c -m 644 ../toxcore/tox.h ../toxcore/tox_old.h '/usr/local/include/tox' /bin/mkdir -p '/usr/local/include/tox' /usr/bin/install -c -m 644 ../toxdns/toxdns.h '/usr/local/include/tox' /bin/mkdir -p '/usr/local/include/tox' /usr/bin/install -c -m 644 ../toxencryptsave/toxencryptsave.h '/usr/local/include/tox' make[3]: Leaving directory '/usr/tox/toxcore-master/build' make[2]: Leaving directory '/usr/tox/toxcore-master/build' make[2]: Entering directory '/usr/tox/toxcore-master' make[3]: Entering directory '/usr/tox/toxcore-master' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/usr/local/lib/pkgconfig' /usr/bin/install -c -m 644 ./libtoxcore.pc '/usr/local/lib/pkgconfig' make[3]: Leaving directory '/usr/tox/toxcore-master' make[2]: Leaving directory '/usr/tox/toxcore-master' make[1]: Leaving directory '/usr/tox/toxcore-master'

ユーザーtox-bootstrapd

を追加して、すべてが機能するようにし、構成ファイルをコピーします。

 useradd --home-dir /var/lib/tox-bootstrapd --create-home --system --shell /sbin/nologin --comment "TOX DHT bootstrap daemon" --user-group tox-bootstrapd chmod 700 /var/lib/tox-bootstrapd cp tox-bootstrapd.conf /etc/tox-bootstrapd.conf cp other/bootstrap_daemon/tox-bootstrapd.conf /etc/tox-bootstrapd.conf

このファイルを編集します。

 vi /etc/tox-bootstrapd.conf

enable_lan_discovery = true

サーバーがあり、それはDC（またはそのenable_lan_discovery = true

です！）にあります。したがって、LANでノードを実行することは意味がありませんtrue

をfalse

に変更しfalse

。

tcp_relay_ports = [443, 3389, 33445]

-ノードが応答するポート。つまり、デフォルトのノードport = 12345

をport = 12345

port = 33445

ではなくport = 12345

に変更した場合、ノードはポート12345で動作し、 enable_tcp_relay = true

有効になっているポート443、3389、および33445に対応します。私の場合、 enable_tcp_relay = true

ままにしてtcp_relay_ports = [12345, 33445]

。

enable_motd = true

-motd（今日のメッセージ）、 true

がmotd

から最初の255文字を返す場合、つまりmotd = "Vive le TOX"

を持っている場合、motdを要求したmotd = "Vive le TOX"

はVive le TOX

を受け取ります

DHTで作業しており、実際にtoxをサポートしたいので、ファイルの最後にあるbootstrap_nodes

セクションに次のコードを追加します。これらはすべて、 Wikiから取得した現在のノードです。

bootstrap_nodes

 bootstrap_nodes = ( ### tox.0x10k.com/bootstrapd-conf/ { #1 [DE] - sonOfRa address = "144.76.60.215" port = 33445 public_key = "04119E835DF3E78BACF0F84235B300546AF8B936F035185E2A8E9E0A67C8924F" }, { #2 [US] - stal address = "23.226.230.47" port = 33445 public_key = "A09162D68618E742FFBCA1C2C70385E6679604B2D80EA6E84AD0996A1AC8A074" }, { #3 [FR] - Munrek address = "195.154.119.113" port = 33445 public_key = "E398A69646B8CEACA9F0B84F553726C1C49270558C57DF5F3C368F05A7D71354" }, { #4 [US] - nurupo (nurupo.contributions@gmail.com) address = "198.46.138.44" port = 33445 public_key = "F404ABAA1C99A9D37D61AB54898F56793E1DEF8BD46B1038B9D822E8460FAB67" }, { #5 [DE] - Martin Schröder address = "46.38.239.179" port = 33445 public_key = "F5A1A38EFB6BD3C2C8AF8B10D85F0F89E931704D349F1D0720C3C4059AF2440A" }, { #6 [NL] - Impyy address = "178.62.250.138" port = 33445 public_key = "788236D34978D1D5BD822F0A5BEBD2C53C64CC31CD3149350EE27D4D9A2F9B6B" }, { #7 [DE] - Manolis address = "130.133.110.14" port = 33445 public_key = "461FA3776EF0FA655F1A05477DF1B3B614F7D6B124F7DB1DD4FE3C08B03B640F" }, { #8 [CA] - noisykeyboard address = "104.167.101.29" port = 33445 public_key = "5918AC3C06955962A75AD7DF4F80A5D7C34F7DB9E1498D2E0495DE35B3FE8A57" }, { #9 [US] - Busindre address = "205.185.116.116" port = 33445 public_key = "A179B09749AC826FF01F37A9613F6B57118AE014D4196A0E1105A98F93A54702" }, { #10 [US] - Busindre address = "198.98.51.198" port = 33445 public_key = "1D5A5F2F5D6233058BF0259B09622FB40B482E4FA0931EB8FD3AB8E7BF7DAF6F" }, { #11 [LV] - fUNKIAM address = "80.232.246.79" port = 33445 public_key = "CF6CECA0A14A31717CC8501DA51BE27742B70746956E6676FF423A529F91ED5D" }, { #12 [NL] - ray65536 address = "108.61.165.198" port = 33445 public_key = "8E7D0B859922EF569298B4D261A8CCB5FEA14FB91ED412A7603A585A25698832" }, { #13 [GB] - Kr9r0x address = "212.71.252.109" port = 33445 public_key = "C4CEB8C7AC607C6B374E2E782B3C00EA3A63B80D4910B8649CCACDD19F260819" }, { #14 [SI] - fluke571 address = "194.249.212.109" port = 33445 public_key = "3CEE1F054081E7A011234883BC4FC39F661A55B73637A5AC293DDF1251D9432B" }, { #15 [UA] - MAH69K address = "185.25.116.107" port = 33445 public_key = "DA4E4ED4B697F2E9B000EEFE3A34B554ACD3F45F5C96EAEA2516DD7FF9AF7B43" }, { #16 [CA] - WIeschie address = "192.99.168.140" port = 33445 public_key = "6A4D0607A296838434A6A7DDF99F50EF9D60A2C510BBF31FE538A25CB6B4652F" }, { #17 [DE] - clearmartin address = "46.101.197.175" port = 443 public_key = "CD133B521159541FB1D326DE9850F5E56A6C724B5B8E5EB5CD8D950408E95707" }, { #18 [SE] - Rotkaermota address = "95.215.46.114" port = 33445 public_key = "5823FB947FF24CF83DDFAC3F3BAA18F96EA2018B16CC08429CB97FA502F40C23" }, { #19 [DE] - tastytea address = "5.189.176.217" port = 5190 public_key = "2B2137E094F743AC8BD44652C55F41DFACC502F125E99E4FE24D40537489E32F" }, { #20 [DE] - pucetox (1D1C0B992DEB6D7F18561176F7F5E572BCC7F2BA5CFA7E9E437B9134122CE96D906A6119F9D2) address = "148.251.23.146" port = 2306 public_key = "7AED21F94D82B05774F697B209628CD5A9AD17E0C073D9329076A4C28ED28147" }, { #21 [US] - ru_maniac (EBD2A7B649ABB10ED9F47E5113F04000F39D46F087CEB62FCCE1069471FD6915256D197F2A97) address = "104.223.122.15" port = 33445 public_key = "0FB96EEBFB1650DDB52E70CF773DDFCABE25A95CC3BB50FC251082E4B63EF82A" }, { #22 [DE] - Deliran address = "78.47.114.252" port = 33445 public_key = "1C5293AEF2114717547B39DA8EA6F1E331E5E358B35F9B6B5F19317911C5F976" }, { #23 [RU] - D4rk4 (35EDC07AEB18B163E07EE33F6CDDA63969F394FF6A617CEAB22A7EBBEAAAF854C0EDFBD46898) address = "83.137.53.211" port = 1813 public_key = "53737F6D47FA6BD2808F378E339AF45BF86F39B64E79D6D491C53A1D522E7039" }, { #24 [NL] - tibietigni (D36CC0B702621F48FDBC540A57124A744E5133C932E65ACCEBCABF2586A02455171717175989) address = "81.4.110.149" port = 33445 public_key = "9E7BD4793FFECA7F32238FA2361040C09025ED3333744483CA6F3039BFF0211E" }, { #25 [RU] - Igor Novgorodov address = "95.31.20.151" port = 33445 public_key = "9CA69BB74DE7C056D1CC6B16AB8A0A38725C0349D187D8996766958584D39340" }, { #26 [CA] - wildermesser address = "104.233.104.126" port = 33445 public_key = "EDEE8F2E839A57820DE3DA4156D88350E53D4161447068A3457EE8F59F362414" }, { #27 [FR] - a68366 address = "51.254.84.212" port = 33445 public_key = "AEC204B9A4501412D5F0BB67D9C81B5DB3EE6ADA64122D32A3E9B093D544327D" }, { #28 [BR] - umgeher address = "179.35.206.22" port = 33445 public_key = "188E072676404ED833A4E947DC1D223DF8EFEBE5F5258573A236573688FB9761" }, { #29 [FR] - Skey address = "5.135.59.163" port = 33445 public_key = "2D320F971EF2CA18004416C2AAE7BA52BF7949DB34EA8E2E21AF67BD367BE211" }, { #30 [RU] - ru_maniac (EBD2A7B649ABB10ED9F47E5113F04000F39D46F087CEB62FCCE1069471FD6915256D197F2A97) address = "185.58.206.164" port = 33445 public_key = "24156472041E5F220D1FA11D9DF32F7AD697D59845701CDD7BE7D1785EB9DB39" } )

デーモンのスクリプトをinit.dにコピーし、実行および実行の許可を与えます！

 cp other/bootstrap_daemon/tox-bootstrapd.sh /etc/init.d/tox-bootstrapd chmod 755 /etc/init.d/tox-bootstrapd update-rc.d tox-bootstrapd defaults service tox-bootstrapd start

仕組みを確認します。

 root@l64tox1:~# service tox-bootstrapd status ● tox-bootstrapd.service - LSB: Starts the Tox DHT bootstrapping server daemon Loaded: loaded (/etc/init.d/tox-bootstrapd) Active: active (running) since Wed 2015-12-23 17:12:53 CET; 13min ago Process: 396 ExecStart=/etc/init.d/tox-bootstrapd start (code=exited, status=0/SUCCESS) CGroup: /system.slice/tox-bootstrapd.service └─436 /usr/local/bin/tox-bootstrapd /etc/tox-bootstrapd.conf Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #13: 185.25.116.107:33445 DA4E4ED4B697F2E9B000EEFE3A34B554ACD3F45F5C96EAEA25...7FF9AF7B43 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #14: 192.99.168.140:33445 6A4D0607A296838434A6A7DDF99F50EF9D60A2C510BBF31FE5...5CB6B4652F Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #15: 46.101.197.175:443 CD133B521159541FB1D326DE9850F5E56A6C724B5B8E5EB5CD8D950408E95707 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #16: 95.215.46.114:33445 5823FB947FF24CF83DDFAC3F3BAA18F96EA2018B16CC08429CB97FA502F40C23 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #17: 5.189.176.217:5190 2B2137E094F743AC8BD44652C55F41DFACC502F125E99E4FE24D40537489E32F Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #18: 198.46.138.44:33445 F404ABAA1C99A9D37D61AB54898F56793E1DEF8BD46B1038B9D822E8460FAB67 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: List of bootstrap nodes read successfully. Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Public Key: *    * Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Forked successfully: PID: 436. Dec 23 17:12:53 l64tox1 tox-bootstrapd[436]: Connected to other bootstrap node successfully. Hint: Some lines were ellipsized, use -l to show in full.

ログの例

 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Running "tox-bootstrapd" version 2014101200. Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully read: Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: 'pid_file_path': /var/run/tox-bootstrapd/tox-bootstrapd.pid Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: 'keys_file_path': /var/lib/tox-bootstrapd/keys Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: 'port': 12345 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: 'enable_ipv6': true Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: 'enable_ipv4_fallback': true Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: 'enable_lan_discovery': false Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: 'enable_tcp_relay': true Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Read 2 TCP ports: Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Port #0: 12345 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Port #1: 33445 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: 'enable_motd': true Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: 'motd': blog.saraeff.net Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: General config read successfully Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Set MOTD successfully. Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Keys are managed successfully. Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Initialized Tox TCP server successfully. Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #0: 144.76.60.215:33445 04119E835DF3E78BACF0F84235B300546AF8B936F035185E2A8E9E0A67C8924F Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #1: 23.226.230.47:33445 A09162D68618E742FFBCA1C2C70385E6679604B2D80EA6E84AD0996A1AC8A074 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #2: 195.154.119.113:33445 E398A69646B8CEACA9F0B84F553726C1C49270558C57DF5F3C368F05A7D71354 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #3: 46.38.239.179:33445 F5A1A38EFB6BD3C2C8AF8B10D85F0F89E931704D349F1D0720C3C4059AF2440A Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #4: 178.62.250.138:33445 788236D34978D1D5BD822F0A5BEBD2C53C64CC31CD3149350EE27D4D9A2F9B6B Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #5: 130.133.110.14:33445 461FA3776EF0FA655F1A05477DF1B3B614F7D6B124F7DB1DD4FE3C08B03B640F Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #6: 104.167.101.29:33445 5918AC3C06955962A75AD7DF4F80A5D7C34F7DB9E1498D2E0495DE35B3FE8A57 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #7: 205.185.116.116:33445 A179B09749AC826FF01F37A9613F6B57118AE014D4196A0E1105A98F93A54702 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #8: 198.98.51.198:33445 1D5A5F2F5D6233058BF0259B09622FB40B482E4FA0931EB8FD3AB8E7BF7DAF6F Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #9: 80.232.246.79:33445 CF6CECA0A14A31717CC8501DA51BE27742B70746956E6676FF423A529F91ED5D Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #10: 108.61.165.198:33445 8E7D0B859922EF569298B4D261A8CCB5FEA14FB91ED412A7603A585A25698832 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #11: 212.71.252.109:33445 C4CEB8C7AC607C6B374E2E782B3C00EA3A63B80D4910B8649CCACDD19F260819 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #12: 194.249.212.109:33445 3CEE1F054081E7A011234883BC4FC39F661A55B73637A5AC293DDF1251D9432B Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #13: 185.25.116.107:33445 DA4E4ED4B697F2E9B000EEFE3A34B554ACD3F45F5C96EAEA2516DD7FF9AF7B43 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #14: 192.99.168.140:33445 6A4D0607A296838434A6A7DDF99F50EF9D60A2C510BBF31FE538A25CB6B4652F Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #15: 46.101.197.175:443 CD133B521159541FB1D326DE9850F5E56A6C724B5B8E5EB5CD8D950408E95707 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #16: 95.215.46.114:33445 5823FB947FF24CF83DDFAC3F3BAA18F96EA2018B16CC08429CB97FA502F40C23 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #17: 5.189.176.217:5190 2B2137E094F743AC8BD44652C55F41DFACC502F125E99E4FE24D40537489E32F Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Successfully added bootstrap node #18: 198.46.138.44:33445 F404ABAA1C99A9D37D61AB54898F56793E1DEF8BD46B1038B9D822E8460FAB67 Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: List of bootstrap nodes read successfully. Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Public Key: *    * Dec 23 17:12:53 l64tox1 tox-bootstrapd[404]: Forked successfully: PID: 436. Dec 23 17:12:53 l64tox1 tox-bootstrapd[436]: Connected to other bootstrap node successfully.

表示エラー：

共有ライブラリのロード中のエラー：libtoxcore.so.0：共有共有オブジェクトファイルを開けません：そのようなファイルまたはディレクトリはありません

次のldconfig

ようにログをリアルタイムで見ることができます：tail -f /var/log/syslog|grep "tox-bootstrapd"

しかし、すべてが正常に機能する場合、起動後は何もありません、okromy technicals、いいえ。

トラフィックと負荷について：

toxnode_01

トラフィックは230〜250 kbpsのレベルに保たれますが、330 kbpsに達することもあります。tcpdumpはudpパケットのみを生成します。1日の作業で、2.5 GBのトラフィックが到着して飛び去りました。これにより、1か月あたり75ギガのギブが発生します。システムの負荷は1％-2％で、一定の1％（0.4％-1.4％）です。これは8.2 debian_64で動作し、1つのコアを持ち、1GBのRAMを搭載しています。週末までにすべてが変更されない場合、1 GBではなく512 MBが残ります。

匿名で自由なコミュニケーションの未来はあなたの手にあります;実際、それは「現状のまま」の言論の自由です。したがって、誰もが仮想マシンに5セントを投資すれば、これはtoxコミュニティに大いに役立ちます。

/nikitasius 4339E5C156D4858940E20F82BE6625BC69B4167EAE1E9924EF79AA474E2A454BE4323FE37C61

UPD：~~2015-12- 23 24 25 27~~ 2016年1月13日、ノードリストを更新し、唯一の存在である20 26 27 30ノード（ここで及び発振器）。

upd：2015-12-24 @ 10：03、ノードを起動した後、連絡する必要があります

国、ipv4 / ipv6、ポート、公開鍵ノード、および目的のニックネーム（たとえば、匿名性を維持するため）を報告します。その後、ノードをwikiとトラッカーに追加します。これは、新しい人々があなたを手放すことができるようにするために必要です。ノードは管理者に文字を追加しなくても機能しますが、設定で他のノードを指定するだけで十分です。

upd：2015-12-24 @ 1206、ハッシュで友人を追加すると、クライアントは追加された人の公開鍵を受け取り、その後IPアドレスを見ることができることを追加します。（Prevent_Tracking.txt、ycombinator）。誰かを認証するときは、このことに留意してください。

問題はまだ残っています：クリーンアカウントで Wiresharkを実行しました20人のグループ（groupbot）で、ipからudpを見ましたが、これはノードに対応していません。グループに属しているため、すべてのメンバーが互いのIPを「見る」ことができます。私の手からの情報、私は他の人が書いているものをチェックしませんでした。しかし、これに該当する場合は、どこかに入場するための招待状を受け取るときに注意する必要があります。私が間違っている場合は、このことについてコメントによく書いてください。また、森の起源の脚注も書いてください。

upd：2015-12-25 @ 2010、記事の冒頭に3つのインストールオプションが追加されました：「myself」、「スクリプトを使用するmyself」、および「from packages」。

upd：2015-12-25 @ 2305、設定用のノードリストジェネレーター、スポイラー下の詳細。

これ

: http://tox.0x10k.com/bootstrapd-conf

仕組み：

tox.0x10k.com/bootstrapd-conf-ipv46.txt ( tox.0x10k.com/bootstrapd-conf.txt ) — IPv4 , IPv4 , IPv-6.
tox.0x10k.com/bootstrapd-conf-ipv4.txt — IPv4 .
tox.0x10k.com/bootstrapd-conf-ipv6.txt — IPv6 .
tox.0x10k.com/bootstrapd-conf-ipv64.txt — IPv6 , IPv6 , IPv4.

"-de" "-DE" ( ), "-us". "-de-us", tox.0x10k.com/bootstrapd-conf-ipv46-de-us.txt , IPv4 (, IPv4 , IPv6) (DE) (US).

ID, , , :

tox.0x10k.com/bootstrapd-conf-ipv46-2.txt — #2

tox.0x10k.com/bootstrapd-conf-ipv46-fr-3.txt — FR #3 ( tox.0x10k.com/bootstrapd-conf-ipv46-fr.txt , FR).

toxコミュニティに参加するか、5分でノードをインストールします

More articles: