Guest from sunny California: MrSpeakers Ether Flow

American engineer Dan Clark is known not only to avid audiophiles: Platinum Audio dynamic heads, widely distributed in the 90s of the last century, and many planar-magnetic headphones — for example, some Fostex models — came out from under his "pen." For almost 20 years, Clark developed electronic Hi-End equipment, but at one point I realized that he wanted to start everything from scratch. Thus, a new company appeared, which quickly gained credibility among famous manufacturers.



The engineer called his brainchild MrSpeakers and decided to completely change the concept of creating planar-magnetic headphones. First, it was decided that all models will be developed and produced only in California, USA. Secondly, Clark began the creation of planars literally from scratch - pedantry and the desire to work through every detail played a role. Thus, the Ether model was born, using special emitters called V-Planar: they have special stampings in the shape of the letter V in cross section. This allows you to increase the detail, accuracy and expand the frequency range.



You can find the same isodynamic emitter in Ether Flow headphones, but the main difference of this model is TrueFlow technology. Behind a simple at first glance, the marketing name hides a really important feature - the absence of sharp edges and other obstacles to the air. Therefore, the flow of magnets by the air flow is smooth, while in most other headphones the movement of air turns out to be chaotic.

Ether Flow Characteristics

Sound Emitter Type	Isodynamic
Acoustic design	Open
Frequency range	10 - 20 000 Hz
Sensitivity	92 dB
Impedance	22 ohm
Cable	Straight Y-shaped
Weight	390 g

Contents of delivery

The stylish black box, on which the name of the headphone stands, conceals a hard case with a soft surface inside. Here, headphones fit freely with a complete cable, and the cover will protect against most physical damage that can happen in everyday life.















In addition to the cable and headphones, put a certificate of conformity with the serial number of the model. This is quite common practice among the manufacturers of premium headphones: first, the authenticity of the instance is confirmed (it is not so easy to forge a certificate); secondly, the buyer is given to understand that he has become a member of a certain "closed club". Someone will say that all this is “Ponte”, but how many people, so many opinions.







The bundled cable has a 4-pin connector and is fixed very securely. As befits a Hi-End device, the manufacturer offers the buyer to choose one of the cables that they prefer: balanced XLR, unbalanced 1/4 ″, unbalanced 3.5 mm and balanced 2.5 mm. Cable length 1.2 meters - for the home or a small studio is more than enough. Yes, on the street such headphones are hardly advisable to use.







This, in fact, the complete set of headphones ends. No cloths for wiping fingerprints, spray for the care of leather ear pads and other things. It seems that among manufacturers there is an unspoken rule: the more expensive the headphones, the more minimalist the approach to the set.

Appearance

No one is already surprised that when developing headphones of this class most of the cost is used materials. There is a definite point in this - Ether Flow looks very solid. Thus, the soft ear cushions of the headphones are made of genuine Italian leather, and an alloy of titanium and nickel (nitinol) is used as the material for the headband, which can memorize the shape.











The substrate is also represented with natural leather with a mikrosamshi, and the details and each cog are made to order. In general, premiums for 140,000 rubles are clearly enough. Even ear pads are located at a special angle to account for the peculiarities of the anatomical structure of the auricle.







Many people avoid open headphones, because they are afraid of extra sounds around, which can be heard because of the design features. In Ether Flow, MrSpeakers tried to do everything to leave the owner of the headphones alone with the music: the model is not only well-damped, but also provides improved noise insulation due to the angle of inclination and fit of the ear cushions. It was not possible to achieve complete sound insulation for obvious reasons, but it seems that with such an acoustic arrangement it is simply impossible to do something better.











The manufacturer has paid a lot of attention to ergonomics. It seems that the headphones can be worn only in one position and nothing else: when the whole structure is on the head, there is no desire to move it towards. As if everything was measured at the factory so that the headphones fit perfectly on any head. Yes, and the weight of the Ether Flow is small compared to other planar-magnetic headphones. If you work continuously on the same recording studio for 5-6 hours, your ears will not get tired, and you will get used to weight in just 15-20 minutes of listening.

Sound

Connecting such headphones to a smartphone or tablet is a real crime. Ideally, get a DAC for headphones like BURSON AUDIO CONDUCTOR V2 + or ADL BY FURUTECH STRATOS, but Ether Flow will do fine with the same Astell & Kern SP1000, at worst, as they say - FIIO X3 III. To experience the most pleasant sensations, it is better to reproduce only high-resolution recordings in Lossless-formats. They didn’t do the warming up, let’s leave it to the “pumped” audiophiles.







V-Planar drivers feel very good - planar emitters sound much bass and more dynamic. TrueFlow technology makes a huge contribution, which optimizes the passage of sound waves to detail the sound and reduce the level of distortion (in the graphs below you can see it). The emphasis on bass, as was said earlier, is noticeable immediately, but the mid frequencies are not forgotten here either - we can safely say that the sound resolution is close to the best electrostatic models. In general, the sound feed is very clean and tidy, this can be seen only at the high level single points.









No one will argue with the fact that you have to listen to these headphones yourself, in this case you should not count on the objectivity of the opinions of others, since the device is clearly not in any wallet. Nevertheless, the majority of those who managed to “touch the beautiful” agree that the Ether Flow gives an honest, not embellished sound. And, perhaps, it is this fact, and not the price, that makes these headphones specific and audiophile.



The model is clearly intended for studio or home use, and in the latter case, the fireplace must be lit in front of the listener, which warms up on a cold autumn day. The genre compatibility of the headphones is good, in particular, they are revealed with jazz, live performances and hip-hop (with the latter due to the emphasis on bass). Not very impressive is the reproduction of electronic music and hard rock - apparently, the Ether model is better suited for this purpose.

Planners to listen to

MrSpeakers once again pleased with interesting magnetic planar headphones, which can be safely put on a par with devices of famous brands. The positive aspects of Ether Flow are unequivocally attributed to ergonomics (well, really comfortable headphones), high build quality, the use of noble materials (good without fanaticism, otherwise the price tag would be 2-3 times higher) and, of course, a balanced sound that is neutral and the absence of any "touch-up".



The only thing that these headphones lack a little is sensitivity, also Ether Flow is painfully related to the sound source, if the latter does not reach the desired level. And in order for the headphones to open properly, such a device will have to be acquired. However, in the studio conditions such good is usually a lot.







Scold the manufacturer for the price in this case definitely does not make any sense. Yes, from the price tag above 100,000 rubles for headphones, many hair on the head stand on end, but Ether Flow will justify the investment. The main thing is to listen to them before you buy, because audiophile sound is not close to everyone’s heart.