IIS एक्सप्रेस में वेब अनुप्रयोग डीबग करना

जो लोग विज़ुअल स्टूडियो में IIS एक्सप्रेस के आधिकारिक समर्थन के लिए इंतजार नहीं करना चाहते हैं, उनके लिए डिबगिंग विकल्प को कसने का एक आसान तरीका है।



हमें केवल WebMatrix बीटा डाउनलोड करना है, जिसमें IIS एक्सप्रेस भी शामिल है (अभी तक कोई अलग डाउनलोड नहीं है)।

हमने IIS एक्सप्रेस लगाई

WebMatrix स्थापित करने के बाद, हम फ़ाइल "मेरे दस्तावेज़ \ IISExpress8 \ config \ applicationhost.config" को संपादित और संपादित करते हैं।

145 वीं पंक्ति पर जाएं और WebAite1 की छवि और समानता में एक और साइट परिभाषा बनाएं, जिससे सर्वरऑटोस्टार्ट विशेषता को हटाया जा सके:

Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >

1. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
   
   
   
   
2. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
   
   
   
   
3. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
   
   
   
   
4. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
   
   
   
   
5. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
   
   
   
   
6. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
   
   
   
   
7. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
   
   
   
   
8. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
   
   
   
   
9. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
   
   
   
   
10. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
    
    
    
    
11. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
    
    
    
    
12. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
    
    
    
    
13. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
    
    
    
    
14. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
    
    
    
    
15. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
    
    
    
    
16. Copy Source | Copy HTML < site name ="WebSite1" id ="1"> < application path ="/"> < virtualDirectory path ="/" physicalPath ="%IIS_SITES_HOME%\WebSite1" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8080:localhost" /> </ bindings > </ site > < site name ="VSDebug" id ="2"> < application path ="/" applicationPool ="Clr4IntegratedAppPool"> < virtualDirectory path ="/" physicalPath ="c:\dev\mysite" /> </ application > < bindings > < binding protocol ="http" bindingInformation =":8421:localhost" /> </ bindings > </ site >
    
    
    
    

मुझे लगता है कि बदली हुई विशेषताओं के मूल्य स्पष्ट हैं, इसलिए उनका वर्णन छोड़ दें।

हमारे सर्वर को शुरू करने का समय आ गया है। आप निम्न आदेश के साथ ऐसा कर सकते हैं:



"C:\Program Files (x86)\Microsoft WebMatrix\iisexpress.exe" /site:{YOUR_SITE_NAME}







{Your_SITE_NAME} के बजाय आपको अपनी साइट का नाम, जिसे आपने applicationhost.config में निर्दिष्ट किया है, का नाम बदलना होगा। मेरे मामले में, यह वीएसडेबग है। यदि सब कुछ सही ढंग से किया जाता है, तो सर्वर शुरू हो जाएगा और आपकी साइट उपलब्ध होगी।

विज़ुअल स्टूडियो को कस्टमाइज़ करें

हम स्टूडियो लॉन्च करते हैं और अपनी वेबसाइट उस पर अपलोड करते हैं। प्रोजेक्ट पर राइट-क्लिक करें, गुण चुनें और वेब टैब पर जाएं। यहां हमें बाहरी प्रोग्राम शुरू करने और अपना सर्वर शुरू करने के लिए कमांड निर्दिष्ट करने की आवश्यकता है।







नीचे, उसी विंडो में, कस्टम वेब सर्वर का उपयोग करें चुनें और साइट URL फिर से दर्ज करें।







डीबगर्स अनुभाग में, सभी बॉक्स अनचेक करें, क्योंकि स्टूडियो IIS से जुड़ने की कोशिश करेगा और हमें डिबग करने की अनुमति नहीं देगा।







अब गुणों को सहेजें और डीबगिंग शुरू करने के लिए F5 दबाएं। आप IIS एक्सप्रेस ट्रे आइकन का उपयोग करके ब्राउज़र में साइट खोल सकते हैं।







PS निम्नलिखित कामरान अयूब लेख ने मुझे इस प्रक्रिया का वर्णन करने के लिए प्रेरित किया। हालांकि, मुझे लगता है कि मेरे द्वारा वर्णित विधि कुछ सरल है और सर्वर को मैन्युअल रूप से पुनरारंभ करने और इसे संलग्न करने की आवश्यकता को समाप्त करता है।